Operation; Pre-Ride Inspection - Honda GOLDWING GL1500 Owner's Manual

OPERATION
PRE-RIDE INSPECTION
I!I!B
• If the Pre-ride Inspection is not performed, severe personal
injury or vehicle damage may result.
Inspect your motorcycle every day before you ride it. The
items listed here will only take a few minutes to inspect, and in
the long run they can save time, expense, and possibly your
life.
1. Engine oil level- add engine oil if required (page 29). Check
for leaks.
2. Fuel level-fill fuel tank when necessary (page 26). Check
for leaks.
3. Coolant level-add coolant if required. Check for leaks
(pages 24-25).
4. Front and rear brakes-check operation; make sure there is
no brake fluid leakage. Add fluid if necessary (pages
21-22).
5. Tyres- check condition (pages 31 - 33) and pressure
(page 31).
6. Throttle-check for smooth opening and closing in all steer-
ing positions.
7. Lights and horn - check that headlight, tail/stoplight, turn
signals, indicators and horn function properly.
8. Engine stop switch-check for proper function (page 35).
9. Ignition cut-off system - check for proper function (page
87).
10. Battery electrolyte-check the level and add if necessary
(page 96).
Correct any discrepancy before you ride. Contact your
authorized Honda dealer for assistance if you cannot correct
the problem.
61