Honda GOLDWING GL1500 Owner's Manual page 43

To Cancel the Cruise Control:
Simply push the CRUISE CONTROL master switch until the in-
dicator light goes off (this also erases the memory of the set
speed). If you must temporarily disengage the system (but re-
tain the memory of the set speed); pull the front brake lever or
clutch lever or step on the brake pedal slightly, or close the
throttle. If you are still going above 48 km/h (30 mph), you can
return to the set speed by simply pushing the RESUME switch.
If the motorcycle has decelerated below about 48 km/h (30
mph), you can return to the set speed by using the throttle con-
ventionally until you are above 48 km/h (30 mph) and then
pushing the RESUME switch.
CRUISE CONTROL
Master Switch
V~mntt-+----RESUMEI
11
-°_
ACCEL Switch
SET/OECEL
Switch
To Change the Set Speed:
For a faster speed with a gradual acceleration: Push and hold
the RESUME/ACCEL SWITCH until you reach the desired
speed; release the switch and the system's memory will be
reprogrammed to the new speed. For faster acceleration:
Operate the throttle grip until you reach the desired speed, then
push and release the SET/DECL switch to re-program the
system.
NOTE:
• Any speed above 130 km/h (80 mph) will be memorized as
130 km/h (80 mph).
C R U IS E
-----Indicator
ON
37