Honda GOLDWING GL1500 Owner's Manual page 105

When frequent fuse failure occurs, it usually indicates a short
circuit or an overload in the electrical system. See your
authorized Honda dealer for repair.
CAUTION:
• Turn the ignition switch OFF before checking or replacing
fuses to prevent accidental short-circuiting.
To replace the main fuse
®
,disconnect the lead connector of
the starter magnetic switch.
To replace the main fuse
® '
loosen the screws. Tighten the
screws securely.
To replace reverse fuses, open the cap and pull out the fuses.
To replace any fuses in the fuse box, pull the old fuse out of the
clips with the fuse remover. Push a new fuse into the clips.
LEFT SIDE
Fuse Remover
Fuses
Spare
Fuses
Tail relay, Ign. relay FUSE
99