Honda GOLDWING GL1500 Owner's Manual page 95

--
• Wheel removal requires mechanical skill and professional
tools such as a floor jack and torque wrench. We recom-
mend it be done only by your authorized Honda dealer or
other qualified mechanic.
1. Raise the front wheel off the ground by placing a support
block under the engine.
2. Remove the parts in sequence, according to the order in the
illustration.
CAUTION:
• To
avoid damage to the brake hose, support the caliper
assembly so that it doesn't hang from the hose. Do not
twist the brake hose.
• A void getting grease, oil or dirt
on
the disc or pad surfaces,
because such contamination can cause poor brake perfor-
mance or rapid pad wear after reassembly.
NOTE:
• Do not depress the brake lever and brake pedal when the
wheel is off the motorcycle. The caliper pistons will be
forced out of the cylinders with subsequent loss of brake
fluid. If this occurs, servicing of the brake system will be
necessary. See your authorized Honda dealer for this
service.
89