Printing Font Catalog - Savin MLP31n Operating Instructions Manual

9. Mac OS Configuration
2. Select [Printer's memory] or [Printer's disk].
3. Select the fonts you want to delete.
4. Click [Delete].
A confirmation message appears.
5. Confirm the fonts you want to delete and the printer name from which you want to delete
the fonts.
6. Click [Continue], and then click [OK].
7. Click [OK].
Initializing the Printer Disk
When initializing the printer hard disk, all the fonts downloaded to the printer hard disk drive are deleted.
Before initializing, be sure to check the fonts on the hard disk drive.
• When initializing the printer hard disk drive from the control panel, all of the data on the printer hard
disk drive is deleted. Before initializing, be sure to check the data on the hard disk drive.
• Do not turn off the power switch until initializing is completed, otherwise the hard disk drive might be
damaged.
1. Select [Initialize Printer's Disk...] on the [File] menu.
The confirmation message appears. To cancel initialization, click [Cancel].
2. Click [Execute].
Initializing starts.
9
3. When the completion message appears, click [OK].
Page Setup
You can set the paper size on which to print "Print Fonts Catalogue" and "Prints Fonts Sample".
1. Select [Page Setup...] on the [File] menu.
2. Select the paper size.
3. Click [OK].

Printing Font Catalog

You can print the names of fonts available on the printer.
1. Select [Print Fonts Catalog...] on the [File] menu.
304