Help; Hostname; Ifconfig - Savin MLP31n Operating Instructions Manual

6. Monitoring and Configuring the Printer
Deleting the Domain Name
msh> domainname "interface_name" clear "name"

help

Use the "help" command to display the available command list and the procedures for using those
commands.
Command list display
msh> help
Display of procedure for using commands
msh> help "command_name"

hostname

Use the "hostname" command to change the printer name.
6
View settings
msh> hostname
IPv4 Configuration
msh> hostname "interface_name" "printer_name"
• Enter the printer name using up to 63 alphanumeric characters.
• You cannot use a printer name starting with "RNP" or "rnp"
• The Ethernet interface and IEEE 802.11b interface will have the same printer name.
• wlan can be specified only when the IEEE 802.11b interface unit is installed.
ether
wlan
Initializing the printer name for each interface
msh>hostname "interface_name" clear "name"

ifconfig

Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet mask, broadcast address,
default gateway address) for the printer.
206
Interface name Interface configured
Ethernet interface
IEEE 802.11b interface