Deleting Sample Print Files - Savin MLP31n Operating Instructions Manual

Deleting Sample Print Files

If you are not satisfied with the sample printout, you can delete the Sample Print file, revise it and print it
again until the settings are suitable.
Deleting a selected Sample Print file only
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Sample Print], and then press the [
3. Press the [ ] or [ ] key to display [Delete One File], and then press the [
The file name and the time when the job was stored appear.
4. Press the [ ] or [ ] key to display the file you want to delete, and then press the [
key.
To cancel deleting a Sample Print file, press the [Escape] key.
5. Check the file you want to delete is displayed, and then press the [
The "Deleted" message appears. Then the file selection screen reappears.
6. Press the [Online] key.
The initial screen appears.
Deleting all Sample Print files
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Sample Print], and then press the [
3. Press the [ ] or [ ] key to display [Del. All Files], and then press the [
The user ID when the job was stored appear.
4. Press the [ ] or [ ] key to display the user ID you want to delete, and then press the [
Enter] key.
To cancel deleting a Sample Print file, press the [Escape] key.
5. The number of documents selected for deletion is displayed. Check the number, and if it is
correct, press the [
The "Deleted" message appears. Then the file selection screen reappears.
6. Press the [Online] key.
The initial screen appears.
Enter] key.
Sample Print
Enter] key.
Enter] key.
Enter]
Enter] key.
Enter] key.
Enter] key.
3
101