Checking The Printer Status; Changing Names And Comments - Savin MLP31n Operating Instructions Manual

9. Quit Web Image Monitor.
10. Quit SmartDeviceMonitor for Admin.

Checking the Printer Status

Follow the procedure below to check printer status.
1. Start SmartDeviceMonitor for Admin.
2. On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4
SNMPv3].
The status of printers is indicated by icons in the list.
If you are using IPv4 SNMPv3, enter the user authentication.
3. To obtain status details, click the printer in the list, and then click [Open] on the [Device]
menu.
The printer status appears in the dialog box.
4. Click [System] or [Printer].
5. Quit SmartDeviceMonitor for Admin.
• For details about status icons and items in the dialog box, see SmartDeviceMonitor for Admin Help.

Changing Names and Comments

Follow the procedure below to change the names and comments of the printer.
1. Start SmartDeviceMonitor for Admin.
2. On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4
SNMPv3]. A list of printers using the selected protocol appears.
Select the protocol of the printer whose configuration you want to change.
The status of printers is indicated by icons in the list.
If you are using IPv4 SNMPv3, enter the user authentication.
3. Select a printer in the list.
4. On the [Tools] menu, click [NIB Setup Tool].
A Web browser opens and the dialog box for entering the password for the Web Image Monitor
administrator appears.
NIB Setup Tool starts when the network interface board is default. Follow the instruction on the screen.
Using SmartDeviceMonitor for Admin
6
185