Host Interface Menu; Changing The Host Interface Menu; Host Interface Menu Parameters - Savin MLP31n Operating Instructions Manual

Host Interface Menu

You can set configurations about network connections and communication when using parallel connection
between the printer and the computer. The changed configuration holds even if the printer is turned off.

Changing the Host Interface Menu

Follow the procedure below to change the [I/O Timeout].
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Host Interface], and then press the [
3. Press the [ ] or [ ] key to display [I/O Timeout], and then press the [
4. Press the [ ] or [ ] key to select the lead time needed to end a printing operation, and then
press the [ Enter] key.
Wait two seconds. The [I/O Timeout] menu appears.
5. Press the [Online] key.
The initial screen appears.

Host Interface Menu Parameters

This section explains parameters that can be set on the Host Interface menu.
I/O Buffer
You can select the size of I/O Buffer. Normally it is not necessary to change this setting.
• 128 KB
• 256 KB
• Default: 128 KB
I/O Timeout
You can set how many seconds the printer should wait before ending a print job. If printing operation
is frequently interrupted by data from other ports, you can increase the timeout period.
• 10 seconds
• 15 seconds
• 20 seconds
• 25 seconds
Host Interface Menu
Enter] key.
Enter] key.
157
5