Using The Bike Mount - TomTom Runner & Multi-Sport Reference Manual

To remove the watch from the wrist strap, hold the watch in one hand and lift the strap upwards away
from the watch. The wrist strap pops off the front of the watch.
To place your watch in the desk dock, slide the watch into the dock, following the curve of the back of
the watch.
To remove your watch from the desk dock, push underneath the screen of the watch. The watch will
slide out, following the curve of the back of the watch. Do not lift the watch from the top as this can
damage the desk dock.

Using the bike mount

Note: The bike mount is included with some products and available as an accessory for others.
The bike mount consists of a holder for your watch and a handlebar strap to attach the clip to your
handlebars.
To use the bike mount, do the following:
1. Attach the handlebar strap to the back of the holder.
2. Place the strap on your handlebar and wrap it around the bar.
3. Use the clip on the bottom of the holder to attach the handlebar strap to it.
6