Troubleshooting - Weber Platinum I 2200 LP Owner's Manual

Natural gas barbecue
Table of Contents

Advertisement

Problem
Burners burn with a yellow or orange flame, in
conjunction with the smell of gas.
Burner does not light, or flame is low
in HIGH position.
Experiencing flare-ups:
CAUTION: Do not line the bottom tray
with aluminum foil.
Burner flame pattern is erratic. Flame is low
when burner is on HIGH. Flames do not run
the whole length of the burner tube.
Inside of lid appears to be "peeling."
(Resembles paint peeling.)
If the problem cannot be corrected using these methods, please contact your dealer.

TROUBLESHOOTING

Check
Inspect Weber Spider Stopper
Guards for possible obstructions.
(Blockage of holes.)
Is fuel hose bent or kinked?
Does the Front burner light
with a match?
Are you preheating barbecue in the
prescribed manner?
Are the cooking grates and
Flavorizer Bars heavily coated with
burned-on grease?
Is the bottom tray "dirty" and not
allowing grease to flow into
catch pan?
Are burners clean?
The lid is porcelain-on-steel, not
paint. It cannot "peel." What you are
seeing is baked on grease that has
turned to carbon and is flaking off.
THIS IS NOT A DEFECT.
29
29
Cure
Clean Weber Spider Stopper
Guards. (See Section "Annual
Maintenance".)
Straighten fuel hose.
If you can light the Front burner
with a match, then check the
Crossover Ignition System.
All burners on high for 10 to 15
minutes for preheating.
Clean thoroughly. (See Section
"Periodic Cleaning".)
Clean bottom tray.
Clean burners. (See Section
"General Maintenance".)
Clean thoroughly. (See Section
"Periodic Cleaning".)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Platinum i 2200 ngPlatinum 2200 series

Table of Contents