ZyXEL Communications Vantage Report User Manual page 550

Chapter 14 System Setting
Click System Setting > General Configuration to open the General
Configuration screen.
Figure 257 System Setting > General Configuration
Each field is described in the following table.
Table 240 System Setting > General Configuration
LABEL
Default Chart
Type
Default Page Style Select the default page style in statistical report screens.
DNS Reverse
Hostname
Reverse
Low Free Disk
Mark
Stored Log Days
Language Choose
Apply
Reset
550
DESCRIPTION
Select the default chart type in statistical report screens.
Select Enable if you want Vantage Report to do reverse DNS lookups
in statistical reports. It has no effect in Log Viewer. In reverse DNS
lookups, Vantage Report looks for the domain name associated with
IP addresses that it displays. If Vantage Report finds the domain
name, it displays the domain name and the IP address in the field. If
it does not find the domain name, it only displays the IP address. This
feature might increase the amount of time it takes to display
statistical reports, however.
Select Enable if you want Vantage Report to display the host names
for local computers instead of IP addresses. It has no effect in Log
Viewer. In hostname reverse lookups, Vantage Report looks for the
host name associated with local IP addresses that it displays. If
Vantage Report finds the host name, it displays the host name and
the IP address in the field. If it does not find the host name, it only
displays the IP address. This feature might increase the amount of
time it takes to display statistical reports, however.
You also need to configure the host computers and ZyXEL device (see
Section 14.1.1 on page 551).
When the amount of available disk space falls below this number of
gigabytes, Vantage Report sends a notification to the e-mail address
(if any) for the user account.
root
Enter the number of days you want to store logs in Vantage Report
before removing them.
Choose the language for the Vantage Report.
Click this to save your settings.
Click this to change the settings in this screen to the last-saved
values.
Vantage Report User's Guide