Pppoe (Connected By Username/Password) - ZyXEL Communications VFG6005 User Manual

Static DNS 2
MTU
5.1.3

PPPoE (connected by username/password)

If your ISP provides the username and password, please enter the information accordingly.
Provided by
your ISP
WAN
Connection Type
Authentication
User Name
Password
PPP Connection Type
Max Idle Time
PPP Echo Interval
PPP Retry Threshold
PPP MTU
MTU
The static DNS 2 offered by the ISP.
Maximum Transmission Unit
Select Enable/Disable to enable/disable WAN
PPPoE
The authentication type CHAP or PAP offered by your ISP.
The user name offered by the ISP.
The password offered by the ISP.
Always Connected will maintain the PPPoE dial up connection. On Demand will
connect only when there is traffic.
PPPoE On Demand will only be activated when there is traffic. When there is no
traffic within the max idle time (default: 300 seconds), the PPPoE connection will be
disconnected.
PPPoE echo will ensure whether the link is still up or not (default interval 20
seconds)
When PPPoE echo retry exceeds PPPoE Retry Threshold (default 20 times), the
dial up connection would be recognized as down.
PPPoE maximum transmission unit: up to 1492 bytes (PPPoE's header is 8
bytes)(This value should be less than MTU value at least 8 bytes ).
Physical Device Maximum Transmission Unit
19