Connecting ATX Power Cables
This motherboard comes with a 24-pin and 4-pin ATX power connector as shown
below. Make sure you plug them in the right direction. We strongly recommend
you to insert the 4-pin connector before connecting the 24-pin connector.
Foolproof latch
Note: If your chassis
supports only a 20-pin ATX
power cable, please face the
foolproof latch and plug the
20-pin
ATX
leftwards into the on-board
24-pin ATX power connector
as shown leftwards.
16
+12V
+12V
Ground
Ground
power
cable