Led Indication - AOpen I865Gm-7L/7N User Manual

LED Indication

LED indication including AGP LED, Boot LED and Standby LED are AOpen's
considerate designs that aim at providing you friendly system information.
AGP LED aims to protect your motherboard from being damaged by over voltage
of AGP card. When AGP Protection Technology is implemented, this motherboard
will automatically detect the voltage of AGP card and prevent your chipsets from
being burnt out. Please note that if you install an AGP card with 3.3V, which is not
supported by Intel 865G/865PE/848P chipset, the AGP LED on the motherboard
will light up to warn you the possible damage of the exceeding voltage.
BOOT LED will keep blinking when you power the system on and when your
system is under POST (Power-On Self Test). After POST diagnoses everything all
right and finishes the booting, the LED will stay on otherwise it will remain
flashing to warn you that mistakes have occurred during POST
STBY LED will light up when power is provided to the motherboard, giving you a
convenient indication check the system power status in circumstances such as
power on/off, stand-by mode and RAM power status during Suspend to RAM
mode.
AGP LED
BOOT LED
STBY LED
33