Local Conference - Yealink SIP-T28P User Manual

User Guide for the SIP-T28P IP Phone
Information.
You can create a conference with other two parties using the phone's local conference.
You can create a conference between an active call and a call on hold (on the same or
another line) by pressing the CONF key or the Conf soft key.
Note
Network conference is not available on all servers. For more information, contact your
system administrator.
The SIP-T28P IP phone supports up to 3 parties (including yourself) in a conference call.
This is the default method of conference called Local Conference.
To set up a local conference call:
1. Place a call to the first party.
2. When the first party answers the call, press
call.
The active call is placed on hold.
3. Enter the number of the second party and press
4. When the second party answers the call, you can consult with him or her before
adding to the conference.
5. Press
To join two calls in a conference:
1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Press
(for example, select the call on account 1).
3. Press
selected account.
98
or the Conf soft key again to join all parties in the conference.
or to select the call for conference and make sure the call is active
or the Conf soft key to join the two calls in the conference on the
or the Conf soft key to place a new
, , or the Send soft key.