Table of Contents
Advertisement
3
Connections and controls
CONNECTIONS AND CONTROLS
!
This manual makes reference to the U4103-U4104 receivers
1.
POWER: Switches the receiver on, or enters standby mode. To completely switch off
the receiver, you have to use the switch on the back of the receiver.
2.
POWER LED: Indicates that the mains voltage (90-230 VAC) is available.
3.
SIGNAL LED: Indicates a sufficient signal level at the IF IN input
4.
DISPLAY: 4 Digits to display the program numbers.
5.
IR-SENSOR: Reception sensor for the IR remote control signals
6.
BUTTONS: These buttons allow controlling the main functions of the receiver, and
provide the same functionality as the remote control ones.
1
2
3
4
7
English
5
6
Version 1.0
© UNIVERS
Advertisement
Table of Contents
