System > User Save & Load - Univers by FTE U4103-U4104 User Manual

6
System > User Save & Load
In order to get the stored programs list, press the MENU button and choose the System
menu entry with the
When you press OK, the system menu will be displayed.
Choose now the User Save&Load option and press OK again.
The User Save&Load menu option from the System menu is very important, because
here is where the security of your data lies.
Save Prog & Config
Once you have customized your receiver and everything operates properly, you have the
possibility, with this option, to save the programs' data.
Select the option from the menu and press OK.
A safety message will follow; if you answer <Yes>, all programs' data from the programs
list will be saved.
Load Prog & Config
If you wish to regenerate the stored program list with your own preferences, please select
the option and press OK.
A safety message will follow, when you answer <Yes> the stored program list will be
loaded.
User Guide
The wizard will help you configure the receiver again as in an initial start up except for the
program list modification.
Select the option from the menu and press OK.
Then the installation wizard process will take place.
Menus and OSD
CH buttons.
User Save&Load
Save Prog & Config
Load Prog & Config
User Guide
Key: ▲ ▼ ◄ ► EXIT OK
52
English
Version 1.0 © UNIVERS