Table of Contents
Advertisement
6
Installation Menu > Antenna Config
If you have chosen the Antenna Config menu item, the following menu appears:
Setup
In order to change a satellite's LNB preferences, choose the satellite with the
CH press buttons and then, with the
press OK.
Universal
In the case you use a universal LNB, please select <On> with the
The values for the LNB oscillator will be automatically set (a 22 Khz signal will be
generated).
The values for an universal LNB are:
LNB
Here you can enter the oscillator frequency of your LNB.
With the
VOL press buttons you can select from a list of different parameters.
LNB Power
Here you can determine which voltages are valid for your LNB.
13V = vertical,18V = horizontal, 0V = no voltage.
The correct value for an universal LNB is 13/18V.
If you wish to switch from one tension to another, just do it by pressing
Menus and OSD
Setup
Search Select Easy Tuning Add Delete Rename
01 HotBird
02 Astra
03 Eutelsat W2
04 Eutelsat W1
05 Eutelsat W3
06 Sirius2
07 Intelsat707
Setup the satellite parameters
Key: ▲ ▼ ◄ ► EXIT OK PGUP PGDN
Antenna Config
Universal
On
LNB(Low)
09750
LNB(High)
10600
LNB Power
13/18V
DiSEqC
DiSEqC A
Positioner
Disable
VOL press buttons, select the Setup entry and
LNB(Low)
=
LNB(High)
=
28
English
MHz
MHz
VOL press buttons.
09750MHz
10600MHz
VOL.
Version 1.0
© UNIVERS
Advertisement
Table of Contents
