Univers by FTE U4111 User Manual

Univers by FTE U4111 User Manual

Digital satellite receiver

Advertisement

U4111

Advertisement

Table of Contents
loading

Summary of Contents for Univers by FTE U4111

  • Page 1 U4111...
  • Page 2 SAFETY PRECAUTION Warning: The lightning flash with The exclamation point arrowhead symbol, within To reduce the risk of electric shock, within equilateral don’t open the cabinet. Refer servicing an equilateral triangle, is triangle intended intended to alert the user to qualified personnel only. to alert the user to to “dangerous voltage”...
  • Page 3 QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE Follow next steps for the correct installation of this receiver. STEP 1: CONNECTIONS The coaxial cable, with satellite signal, must be connected to the “IF IN” connector. The “TV SCART” connector must be connector to the TV set. The receiver also includes an UHF modulator, allowing connecting a TV set or VCR.
  • Page 4 QUICK INSTALLATION GUIDE this case, please follow installation steps to search the channels. In order to move through the different options of this menu, please use the keys [ ] of your remote control. If a “Short circuit on the LNB” message is shown on the TV, please check the connections before continuing the installation.
  • Page 5 QUICK INSTALLATION GUIDE - DiSEqC1.1: Use [ ] to switch the options of DiSEqC1.1 switches. - Positioner: Press [ ] to select between “None / DiSEqC1.2 / USALS”. - Toneburst: Press [ ] to switch this function “On” or “Off”. - Polarity: Press [ ] to switch between “Auto / H / V”.
  • Page 6 QUICK INSTALLATION GUIDE STEP 3: TIME CONFIGURATION It is recommended to setup the clock before starting to enjoy the receiver, because correct time maybe is required by some applications. Please complete following options: Press the [Menu] key of the remote control for appearing the main menu. Select the “System Setup” option and confirm pressing [OK].
  • Page 7 QUICK INSTALLATION GUIDE TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Channel Setup: This option allows setting the receiver to start in a predefined channel. Favourite Channel List Name: It allows changing the name of the favourite groups.
  • Page 8: Language:

    QUICK INSTALLATION GUIDE Language: This option allows choosing the language of the menus. TV System: This option allows choosing the video Standard and other parameters of the screen. Time & Timer Setting: Timer setting menu. OSD Setting: This option allows configuring the subtitles of the channel information. Parental Lock: In this option, user can lock the access to the menu and change the password of the receiver.
  • Page 9: Table Of Contents

    INDEX Safety Precaution Caution…..………………….......………………………………………………11 1. Panel & Remote Control Description……...........………………..12 1.1. Front Panel Description……........…………………………12 1.2. Rear Panel Description……........………….…………………..12 1.3. Remote Control Description…..........…………………………..13 2. Basic Operations..................14 2.0. Switch on STB………………………........………………………………...14 2.1. Standby ……………………..........…………………………………...14 2.2. TTX …………..........……………………………………..14 2.3. Mute……………..........………………………………………..14 2.4. Channel Number…………......……………………………………………………14 2.5.
  • Page 10 INDEX 3.3 Channel Setup…………........………………………………..20 3.3.1. Start-up Channel……………........……………………………..21 3.3.2. Channel Play Type………......…………………………………..21 3.4. Favourite Channel List Name……..……………………………………..21 3 . 5 . D e l e t e A l l … … ....… … … … … … … … … … … … … … … … … … . 2 1 3.6.
  • Page 11: Safety Precaution

    SAFETY PRECAUTION Warning: The lightning flash with The exclamation point arrowhead symbol, within To reduce the risk of electric shock, within equilateral don’t open the cabinet. Refer servicing an equilateral triangle, is triangle intended to qualified personnel only. intended to alert the user to alert the user to to “dangerous voltage”...
  • Page 12: Panel & Remote Control Description

    PANEL & REMOTE CONTROL DESCRIPTION 1. PANEL & REMOTE CONTROL DESCRIPTION 1.1. FRONT PANEL DESCRIPTION 1. POWER: Switches the receiver on, or enters standby mode. To completely switch off the receiver, you have to use the switch on the back of the receiver. 2.
  • Page 13: Remote Control Description

    PANEL & REMOTE CONTROL DESCRIPTION 1.- Power 2.- Text 3.- Mute 4.- Numbers 5.- “0” 6.- CH+/CH- 7.- TV/R 8.- VOL+/VOL- 9.- Exit 10.- Menú 11.- Back 12.- OK 13.- EPG 14.- List 15.- Fav 16.- Audio 17.- Info 18.- Fav+/Fav- 19.- Pup/Pdw 20.- Zoom 21.- Sub...
  • Page 14: Standby

    BASIC OPERATIONS 2.1. STANDBY 1. Press [Power] button to switch from TV mode to Standby mode. 2. In Standby mode press [Power] button again to switch back to TV mode. The last active channel will be showed. 3. To switch off the STB complete press the main power button (placed at the rear panel of the receiver).
  • Page 15: Vol+/Vol

    BASIC OPERATIONS 2.8. VOL+/VOL- In TV mode, press [Vol+/Vol-] to adjust volume. 2.9. EXIT Press [Exit] button to exit the current menu. 2.10. MENU Press [Menu] button to enter or exit the current menu. 2.11. RECALL Pressing the [Back] button allows you to toggle between the actual and the last selected channel.
  • Page 16: Epg

    BASIC OPERATIONS 2.13. EPG 1. The STB supports Electronic Program Guides (EPG) to give you information about the actual programs of certain channels like event name, subtitle, description, start and finish time. This feature is depending on the service of the channel provider. Press [EPG] to open the EPG window (OSD 7).
  • Page 17: Information

    BASIC OPERATIONS 2.17. INFORMATION In TV mode, press [INFO] button can open information screen (OSD 12), in the window shows the parameters of current channel. 2.18. FAV +/- 1. In TV mode press the [FAV+/FAV-] buttons to switch between the favourites channels in the current Favourite Group OSD 12 directly.
  • Page 18: Channel

    CHANNEL 3. CHANNEL Press [Menu] in the TV mode to enter the main menu (OSD 15). 1. Press [ ] to select the Channel item. 2. Press [OK] to enter the selected item. In the Channel menu (OSD 16): 3. Press [ ] to select the wanted menu item.
  • Page 19: Move

    CHANNEL 3.1.2. MOVE 1. Press [Red] button to show a moving icon behind the channel name (OSD 19). 2. Move the channel to the desired position with [ Press [OK] to confirm the position. 3.1.3. SORT 1. Press [Green] to open the Sort window (OSD 20). Press [ OSD 19 ] to select and [OK] to confirm your choice.
  • Page 20: Edit

    CHANNEL 3.1.4.4 EDIT Pressing the [Blue] button in the TV Channel List Edit menu will open another window where you can choose between Edit the actual channel or create a new channel (OSD 25). 1. Edit current channel: To edit the channel press the [Red] button (OSD 26).
  • Page 21: Start-Up Channel

    CHANNEL 3.3.1. START-UP CHANNEL Press [OK] to enter “Start-up Channel” menu to see the screen like showed beside (OSD 31): 1. If you set of “Boot on Channel” to “On” you can edit the following two items. If the setting is “Off” the box always starts with the channel that was running when the box has been OSD 30 switched off.
  • Page 22: Restore Channel List And Settings

    CHANNEL ? FREQUENTLY ASKED QUESTION Q: IF I incautiously delete all channels, what should I do? A: There are three ways to restore: - To re-search all channels at the “Installation” menu. - Use “Factory Default” function to restore all channels in the “Tools”...
  • Page 23: Installation

    INSTALLATION 4. INSTALLATION Press [Menu] in the TV mode to enter the main menu (OSD 38). 1. Press [ ] to select the Installation item. 2. Press [OK] to enter the selected item. In the Installation menu (OSD 39): 3. Press [ ] to select the wanted menu item.
  • Page 24: Single Search

    INSTALLATION switches. 4. On “TP Index” item use [ ] to select the desired transponder. 5. In the “FTA Only” item, press [ ] to select to scan only free channels or even scrambled channels. If you select “Yes” it will scan free channels only.
  • Page 25: Tp Scan

    INSTALLATION functions to search the marked satellites and scan channels. 2. On “FTA Only” item, press [ ] to select scanning of all channels or just scanning of free channels. If you select “Yes” it will scan free channels only. 3.
  • Page 26: Satellite List

    INSTALLATION 7. On the “TP Scan” item, press [Exit] to cancel the scanning and saving the found channels. 4.5. SATELLITE LIST When you enter the “Satellite List” menu you can see a window like the one beside (OSD 50): 1. Move through the satellite list using [ ] and mark/ unmark the satellites that you want pressing [OK] 2.
  • Page 27: Satellite Guide

    INSTALLATION 4.7. SATELLITE GUIDE When you enter “Satellite Guide” menu, you will see the screen like beside (OSD 57). Here you can enter your local longitude and latitude and the satellite’s longitude. The receiver calculates the antenna’s azimuth and elevation to point your antenna to the selected satellite.
  • Page 28: S Y S T E M S E T U

    SYSTEM SETUP 5. SYSTEM SETUP Press [Menu] in the TV mode to enter the main menu (OSD 59). 1. Press [ ] to select the System Setup item. 2. Press [OK] to enter the selected item. In the System Setup menu (OSD 60): OSD 59 3.
  • Page 29: Time & Timer Setting

    SYSTEM SETUP select from Auto / PAL / PAL-M / NTSC. Press [ ] to select the desired mode. 2. Aspect Mode is used to switch the screen aspect ratio mode. You can select from Auto / 4:3 PS / 4:3 LB / 16:9. Press [ ] to select the needed mode.
  • Page 30: S L E E P T I M E

    SYSTEM SETUP 5.3.2. TIMER Select “Timer” item and press [OK] to enter the “Timer list” menu (OSD 65). You can press [ ] to select a timer. Then press [Enter] to open the related timer menu (OSD 66). The current time will be displayed in the first column. If the current time is incorrect, please modify it with the [Number] buttons at the “Time”...
  • Page 31: Osd Setting

    SYSTEM SETUP If you set a sleep time, the system will change to Standby mode after the chosen time period. 5.4. OSD SETTING When you select “OSD Setting” you will see a screen like beside (OSD 70): 1. Subtitle Display: Press [ ] to select “On”...
  • Page 32: Lnb Power

    SYSTEM SETUP need to use the new password to open locked menus or locked channels. NOTE: The default password is 0000 5. Press [Exit] to leave the “Parental Lock” menu. 5.6. LNB POWER Here you can set the power output to the LNB (OSD 72). If your receiver is connected to the LNB directly then you need to set the LNB Power to “On”.
  • Page 33: Tools

    TOOLS 6. TOOLS Press [Menu] in the TV mode to enter the main menu (OSD 75). 1. Press [ ] to select the Tools item. 2. Press [OK] to enter the selected item. In the Tools menu (OSD 76): OSD 75 3.
  • Page 34: Game

    TOOLS 6.3. GAME When you enter “Game” menu, you will see three Games include Tetris, Snake and Othello (OSD 79). 6.3.1. TETRIS 1. Mark “Setup” and press [ ] to select the level (speed). 2. Mark “Start” and press [OK] to start the game. 3.
  • Page 35: Rs232 Upgrade

    TOOLS 6.5. SOFTWARE UPGRADE There are two ways of upgrading the software of the receiver as you can see at OSD 81. 6.5.1. RS232 UPGRADE 1. This function allows you to upgrade the software of the receiver. This can be done from PC to receiver or from a master receiver to a slave receiver.
  • Page 36 TOOLS 3. Press [OK] again and you will see the message “Ready to Download” (OSD 85). 4. In the PC application set the Baud Rate to 115200 and start the download procedure. ! Caution: The new download channels will delete the original channels list.
  • Page 37: Technical Specification

    TECHNICAL SPECIFICATION 7. TECHNICAL SPECIFICATION VIDEO Decoding MPEG-2 & MEPG-1 compatible Bit rate Max 15Mbps Output PAL/NTSC Aspect ratio 4:3, 16:9, Auto Active pixel 720x480 @ 30fps; 720x576 @25fps Output connector Scart / RCA AUDIO Decoding MPEG-2/MPEG-1 layer I & II Mode Mono, Dual, Stereo, Joint stereo Bit rate...
  • Page 38 “WE , UNIVERS BY FTE, DECLARE THAT THE PRODUCTS U4111 IS IN CONFORMITY WITH FOLLOWING DIRECTIVES LVD 73/23/EEC EMC 89/336/EEC AS LAST AMENDED BY 93/68/EEC” PAG.

Table of Contents