Speaker Setup - Integra DTR-8.9 Instruction Manual

Advanced Setup—Continued

Speaker Setup

This section explains items on the "Speaker Setup"
menu.
Some of the speaker settings are set automatically by the
Automatic Speaker Setup function (see page 60).
1, 12
Prev
CH
Speaker Settings
See "Speaker Settings" on page 57.
Speaker Configuration
These settings are set automatically by the Automatic
Speaker Setup function (see page 60).
With the Speaker Configuration settings, you can specify
which speakers are connected and a crossover frequency,
distance, and level for each speaker.
The following crossover frequencies can be specified:
Full Band, 40 Hz, 45 Hz, 50 Hz, 55 Hz, 60 Hz, 70 Hz, 80
Hz (THX), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 130 Hz, 150
Hz, or 200 Hz.
Specify Full Band for speakers that can output low-fre-
quency bass sounds adequately, for example, speakers
with a good sized woofer. For smaller speakers, specify
a crossover frequency. Sounds below the crossover fre-
quency will then be output by the subwoofer instead of
the speaker. Refer to your speakers' manuals to deter-
mine the optimum crossover frequencies.
If you're using THX-certified speakers, specify 80 Hz
(THX) for all speakers.
106
Tape Tuner CD
7 8 9
TV VOL
Phono Net/USB D.TUN
+10
0 Clear
--/--- 10 11 12
Input Selector
Macro
1 2 3 Zone 3
Remote Mode
DVD VCR CD Zone 2
CDR/MD/Dock
1
TV Cable Receiver
Net/USB
SAT Tape/AMP
Dimmer Sleep
2–11
+
CH
Enter VOL
Disc
Album
-
Display Muting
Rec Playlist Random
Listening Mode
1 Press the [Receiver] Remote
Mode button, followed by the
Receiver
[Setup] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select "2. Speaker
Setup", and then press [Enter].
The "Speaker Setup" menu appears.
Enter
2. Speaker Setup
1. Speaker Settings
2. Speaker Config
3. Speaker Distance
4. Level Calibration
Enter
5. Equalizer Settings
6. THX Audio Setup
MOVE
3
Use the Up and Down [ ]/[ ] but-
tons to select "2. Speaker Con-
fig", and then press [Enter].
The "Speaker Config" screen appears.
Enter
2–2. Speaker Config
Subwoofer
Front
Center
Surround
Enter
SurrBack
SurrBack Ch
LPF of LFE
DoubleBass
MOVE
ENTER RETURN EXIT
ENTER RETURN SETUP
Yes
Full Band
100Hz
100Hz
100Hz
2ch
120Hz
On
VALUE RETURN RETURN SETUP EXIT