Display Position - Integra DTR-6.9 Instruction Manual

Advanced Setup—Continued
■ Zone2 Maximum Volume
With this setting, you can limit the maximum volume for
Zone 2.
When the "Volume Display" setting is set to "Absolute",
the Maximum Volume range is "Off", 50 to 99.
When it's set to "Relative", the range is "Off", –32 dB to
+17 dB. To disable this setting, select "Off".
■ Zone2 PowerOn Volume
This setting determines what the volume will be for Zone
2 each time the AV receiver is turned on.
When the "Volume Display" preference is set to "Abso-
lute", the range is "Last", "Min", 1 to 99 or "Max".
When it's set to "Relative", the range is "Last", –
–81 dB to +18 dB. To use the same volume level that was
used when the AV receiver was turned off, select "Last".
OSD Setup
■ Immediate Display
This preference determines whether operation details are
displayed onscreen when an AV receiver function is
adjusted.
On: Displayed (default).
Off: Not displayed.
Even when "On" is selected, operation details may not
be output if the input source is connected to an HDMI
IN.
For optimal video performance, THX recommends that
Immediate Display be turned off.
■ Monitor Type
With this preference, you can specify the aspect ratio of
your TV so that the operation details are displayed prop-
erly.
4 : 3: Select if your TV is 4 : 3.
16 : 9: Select if your TV is 16 : 9 (default).

■ Display Position

This preference determines where on the screen opera-
tion details are displayed.
Bottom: Bottom of the screen (default).
Top: Top of the screen.
■ TV Format (not North American models)
See "TV Format Setup (not North American models)"
on page 45.
■ Language
This setting determines the language used for the
onscreen setup menus. You can select: English, German,
French, Spanish, Italian, Dutch, Swedish, or Japanese.
106
12V Trigger A/B/C Setup
See "Using the 12V Triggers" on page 119.
∞
dB,