Other Network Services - Doro 670R Manual

Other network services

The most common network/extra services can be accessed via the menu or
using the menu buttons during a call.
Some functions are pre-programmed but is not certain that all functions will
work on delivery as this will depend on the country of installation/network.
The functions available will depend on your network.
You can change the codes that are sent, see below.
You may have to pay extra for some services, contact your network for more information. Some services will not
work unless you have contacted your network service provider to activate them.
Using the R button manually
1. Connect an external call and wait until the timer is shown. Press R.
2. Enter telephone number or manual code. Press OK.
Busy number/call waiting
1. Connect an external call and wait until the timer is shown.
2. Press Option. Scroll to required service.
CW Accept Answer incoming call waiting (=R
-
- CW Reject Refuse incoming call waiting and send engaged tone (=R
- Auto Call Back When a number is no longer engaged a quick ring signal is heard (=
3. Press OK.
Under inquiry/alternating/answered call waiting
1. Use the respective menu button:
Brok Alternate between two calls (=R
-
- Conf Conference/three party call (=R
Call Forwarding
1. Press Menu. Scroll to Network Services. Press OK.
2. Scroll to Call Forwarding. Press OK.
3. Scroll to required service. Call forwarding: CF Unconditional/if No Reply/if Busy for
transfer of your incoming calls to another telephone number.
4. Press OK. Follow the instructions given in the receiver, handsfree or the display.
Other services
1. Press Menu. Scroll to Network Services. Press OK.
2. Scroll to Functions. Press OK. Scroll to required service.
Call Anonymous Withhold your number from recipient. Enter number.
-
Press . The code for this service must be programmed manually, see below.
Call Wait On/Off Command to turn the call waiting service off or on easily.
-
Network Codes The codes that are sent when you use the network services can be
-
changed. The number for Messages indication can also be programmed here.
3. Press OK. Follow the instructions given in the receiver, handsfree or the display.
Inbox
Shows a summary of new messages e.g. SMS, incoming numbers, message
indication etc. Only shown when there are new messages.
English
).
2
).
2
).
3
0
).
0
).
5