Base Unit Indicators; Making A Call; Receiving A Call; Flash - Doro 640r Manual

Base unit indicators

Flashes when new SMS* message received (only 650r).
Illuminates when charging is in progress.
7
Illuminated on standby and flashes during calls (only 650r) .
/
q Y

Making a call

1. Enter the desired phone number (Del=erase).
2. Press . The number is dialled. Press
O

Receiving a call

1. Wait for the handset to ring.
2. Press
to answer. Press
O
Please note!
As most consumers now use mobile telephones the menu system on this
phone has been designed to work in a similar way ie. the number is dialled
before obtaining a dialling tone. Should you wish to hear a dialling tone
before dialling a number hold down the
To switch between handset/speaker press . Please remember that in speaker mode, it is only possible for one
person at a time to talk.
This product does not usually ring on the first signal to allow correct matching to the phone book.
When the battery is low or when there is too great a distance to the base unit the telephone will be unable to
connect to a line.

Flash

See Other Info Services.

Volume control

The volume may be adjusted during a call using /☼.

Call Back

Press and scroll through the 20 most recently dialled numbers using /☼. Press
r

Mute button

The microphone may be muted/switched on during a call by using

KeyGuard

The KeyGuard is turned off/on by pressing

Turning the handset Off/On

Press and hold the
L
Confirm disconnection by pressing Yes.

Paging

The handset will ring when
after a while or if the

New Message key

Press button to access a new message eg. Caller ID, SMS, message indication or
telephone answer machine (650r only).
to terminate call.
L
button for a few seconds to turn the handset off or on.
on the base unit is pressed. The signal will stop automatically
J
button on the handset or the
L
English
to terminate call.
L
key for a couple of seconds.
O
#.
button on the base unit is pressed.
J

O
.
C
.