Nikon Super CoolScan 4000 ED User Manual page 81

• After placing the adapter on a table or other flat, stable surface, press the release button on top
of the adapter, open the front panel, and open and remove the upper cover.
Release button
• If the end of the film strip is not visible, rotate the toothed wheel until the end of the film
protrudes from either end of the adapter.
Place the adapter on a table or other flat, stable surface before opening the cover. If you hold the
adapter in your hand while removing the upper cover, the adapter could fall to the floor and be
damaged.
Upper cover
Front panel
73