Nikon Super CoolScan 4000 ED User Manual page 42

Registering the COOLSCAN IV ED with Windows Me
11-1
The first time the scanner is connected, Windows will display a message stating that new hardware has
been detected.
11-2
After a short pause, a dialog will be displayed asking whether you
want to search for a driver automatically or specify a location. Be
sure that the Nikon Scan 3 CD is inserted in the CD-ROM drive. If the
CD is not in the CD-ROM drive, insert the disk while holding down
the shift key to prevent the Nikon Scan installer from starting auto-
matically.
11-3
Select Automatic search for a better driver and click Next.
11-4
The dialog shown at right will be displayed. Click Finish.
11-5
The dialog shown at right may be displayed; click Yes to restart your
computer.
After completing device registration, check that the Windows de-
vice drivers are installed and functioning normally.
When you insert the Nikon Scan 3 CD into the CD-ROM drive,
the installer Welcome program may start automatically. Click Exit
to exit the Welcome program.
Pg. For more information on:
39 Confirming That the Device Driver Is Correctly Installed (Windows Me)
34