Nikon Super CoolScan 4000 ED User Manual page 46

Updating the Device Driver (Windows 98SE)
1
Open the Device Manager as instructed in steps
1–3 of "Confirming That the Device Driver Is
Correctly Installed (Windows 98SE). "
2
If your scanner is listed under "Unknown de-
vices" or "Other devices, " or appears next to a
"?" "!" or "x, " double-click the scanner icon to
open the properties window for the device.
3
Click Reinstall driver in the General tab of
the properties window.
4
The Update Device Driver Wizard dialog will
appear. Click Next.
5
Select Search for a better driver than the
one your device is using now and click
Next.
38
6
With the shift key held down to prevent the
installer from starting automatically, insert the
Nikon Scan 3 CD into a CD-ROM drive. Se-
lect Specify a location in the dialog below
and click Browse. (If the Welcome dialog ap-
pears when the CD is inserted in the drive,
click Exit and proceed with driver installation.)
7
In the Browse for Folder dialog, select the folder
on the Nikon Scan 3 CD (Nkscan) containing
the device driver for your scanner.
• 4000 ED
\INF\LS4000\Win98SE
• COOLSCAN IV ED
\INF\LS40
Click OK. This will return you to the dialog
shown above; click Next.
8
The Update Device Driver Wizard will an-
nounce that it has found the drivers for your
scanner; click Next.
9
When a message is displayed indicating that
driver installation is complete, click Finish to
exit the wizard.