Nikon Super CoolScan 4000 ED User Manual page 40

COOLSCAN IV ED
The process of registering your scanner varies with the operating system used.
Registering the COOLSCAN IV ED with Windows 98 SE
11-1
The first time the scanner is connected, Windows will display a message stating that new hardware has
been detected.
11-2
After a short pause, the message will be replaced by the opening
dialog for the Windows hardware wizard. Click Next.
11-3
A dialog will be displayed asking where you want Windows to search
for a driver. Be sure that the Nikon Scan 3 CD is inserted in the CD-
ROM drive. If the CD is not in the CD-ROM drive, insert the disk
while holding down the shift key to prevent the Nikon Scan installer
from starting automatically.
11-4
Select Specify a location and click Browse.
When you insert the Nikon Scan 3 CD into the CD-ROM drive,
the installer Welcome program may start automatically. Click Exit
to exit the Welcome program.
32