Handlebar Switches - Yamaha Morphous CP250W Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

Left
3
1. Dimmer switch " I D / S D "
2. Turn signal switch " ^ i / c j > "
3. Horn switch " L ^ "
Right
EAU12345
1. Engine stop switch "(~)/B3"
2. Start switch "(2\"
Dimmer switch " IO/SO "
Set this switch to " I D " for the high
beam and to " I D " for the low beam.
Turn signal switch "<?/<$>"
To signal a right-hand turn, push this
switch to ">=>". To signal a left-hand
turn, push this switch to "<=". When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " K?- "
Press this switch to sound the horn.
Engine stop switch " O / ^ "
Set this switch to " O " before starting
the engine. Set this switch to "$3" to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch "(g)"
With the sidestand up, push this switch
EAU12400
while applying the front or rear brake to
crank the engine with the starter.
CAUTION:
See page 5-1 for starting instruc-
EAU12460
tions prior to starting the engine.
3-6
EAU12500
EAU12660
EAU12720
ECA10050