Yamaha Morphous CP250W Owner's Manual page 87

Morphous
Table of Contents

Advertisement

After normal use
Remove dirt with warm water, a mild
detergent, and a soft, clean sponge,
and then rinse thoroughly with clean
water. Use a toothbrush or bottlebrush
for hard-to-reach areas. Stubborn dirt
and insects will come off more easily if
the area is covered with a wet cloth for
a few minutes before cleaning.
After riding in the rain, near the sea or
on salt-sprayed roads
Since sea salt or salt sprayed on the
roads during winter are extremely cor-
rosive in combination with water, carry
out the following steps after each ride in
the
rain,
near
the
sea
salt-sprayed roads.
NOTE:
Salt sprayed on roads in the winter may
remain well into spring.
1. Clean the scooter with cold water
and a mild detergent after the en-
gine has cooled down.
CAUTION:
Do not use warm water since it in-
creases the corrosive action of the
salt.
2. Apply a corrosion protection spray
on all metal, including chrome- and
nickel-plated, surfaces to prevent
corrosion.
After cleaning
1. Dry the scooter with a chamois or
an absorbing cloth.
2. Use a chrome polish to shine
chrome, aluminum and stain-
less-steel parts, including the ex-
haust system. (Even the thermally
induced
discoloring
less-steel exhaust systems can be
removed through polishing.)
or
on
3. To prevent corrosion, it is recom-
mended to apply a corrosion pro-
tection
spray
including chrome- and nickel-plat-
ed, surfaces.
4. Use spray oil as a universal clean-
er to remove any remaining dirt.
5. Touch up minor paint damage
caused by stones, etc.
ECA10790
6. Wax all painted surfaces.
7. Let the scooter dry completely be-
fore storing or covering it.
SCOOTER CARE AND STORAGE
A WARNING
• Make sure that there is no oil or
• Before operating the scooter
of
stain-
CAUTION:
• Apply spray oil and wax spar-
on
all
metal,
• Never apply oil or wax to any I
• Avoid using abrasive polishing
NOTE:
Consult a Yamaha dealer for advice on
7-2
wax on the brakes or tires. If
necessary,
clean the
discs and brake linings with a
regular brake disc cleaner or ac-
etone, and wash the tires with
warm water and a mild deter-
gent.
test its braking performance
and cornering behavior.
ingly and make sure to wipe off
any excess.
rubber and plastic parts, but
treat them with a suitable care
product.
compounds as they will wear
away the paint.
EWA10940
brake
ECA10800
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents