Coolant - Yamaha Giggle XF50E Owner's Manual

Coolant<IXE>
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
2
3
ZAUM00**
1. Final transmission oil filler bolt
4 2. Final transmission oil drain bolt
4. Remove the oil filler bolt and drain
5
bolt to drain the oil from the final
transmission case.
5. Install the final transmission oil
6
drain bolt, and then tighten it to the
specified torque.
7
Tightening torque:
8 Final transmission oil drain bolt:
13 Nm (1.3 m • kgf, 9.4 ft • lbf)
9
6. Add the specified amount of the
recommended final transmission
oil, and then install the oil filler bolt
and tighten it to the specified
torque.
1
Tightening torque:
Final transmission oil filler bolt:
23 Nm (2.3 m • kgf, 16.6 ft • lbf)
Recommended final transmission
oil:
See page 8-1.
Oil quantity:
0.10 L (0.11 US qt) (0.09 Imp.qt)
w
● ● ● ● ●
Make sure that no foreign mate-
rial enters the final transmission
case.
● ● ● ● ●
Make sure that no oil gets on the
tire or wheel.
7. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.

Coolant

The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
To check the coolant level
The coolant level should be checked as
EWA11310
follows before each ride. In addition, the
coolant must be changed at the inter-
vals specified in the periodic mainte-
nance and lubrication chart.
1. Place
NOTE:
●
●
2. Check the coolant level in the cool-
6-10
the vehicle on
centerstand.
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
ant reservoir.
EAU17226
EAU20070
EAUT1522
the