Operating The Picture Adjustment; Switching The Backlight On/Off - Pioneer AVIC-D3 Operation Manual

MAN-AVIC-D3-EN.book Page 113 Monday, January 15, 2007 8:51 AM
Operating the Picture Adjust-
ment
• For safety reasons, video images cannot
be viewed while your vehicle is in motion.
To view video images, you must stop in a
safe place and put on the handbrake
before setting your route (see page 11
Interlock for details).
1
Touch "V.Adjust" in the System menu.
2
Select the desired item you want to
adjust.
• Camera – Switch to the picture adjustment
display for the rear view camera
• Source – Switch to the picture adjustment
display for the source screen
• Map – Switch to the picture adjustment
display for the map screen
When the display is already on the screen,
a message to that effect appears.
Brightness – Adjust the black intensity
Contrast – Adjust the contrast
Color – Adjust the colour saturation
Hue – Adjust the tone of colour (red is empha-
sised or green is emphasised)
Dimmer – Adjust the brightness of display
Touching "Source" while adjusting the
rear view camera image returns you to the
previous screen.
The adjustments of Brightness, Contrast
and Dimmer are stored separately when
your vehicle's headlights are off (daytime)
and when your vehicle's headlights are on
(nighttime). These are switched automati-
cally depending on the vehicle's head-
lights are on or off.
You cannot adjust Color and Hue for the
source without video and navigation map
display.
Hue cannot be adjusted for PAL video
sources.
If you select "Source", sources without
video and sources with video are saved
separately in the memory.
The picture adjustment may not be able to
be used with some rear view cameras.
The same setting is selected for the normal
background picture and the navigation
map display.
Because of the LCD screen characteris-
tics, you may not be able to adjust the
screen at low temperatures.
3
Touch "+" or "–" to adjust the selected
item.
Each time you touch "+" or "–" increases or
decreases the level of selected item. +24 to –
24 is displayed as the level is increased or
decreased.
Adjust the Dimmer in the range of +1 to
+48.
4
Touch "ESC" to return to the previous
screen.

Switching the backlight On/Off

By turning off the backlight of the LCD screen,
you can turn off the screen display without turn-
ing off the voice guidance.
1
Touch "Screen Off" in the System menu.
The backlight turns off, and the screen turns
off.
To turn on the backlight, touch the screen
again.
113