Pioneer AVIC-D3 Operation Manual page 62

MAN-AVIC-D3-EN.book Page 60 Monday, January 15, 2007 8:51 AM
(5) Power Voltage
The power supply (reference value) provided
from the vehicle battery to the navigation sys-
tem is shown. If the voltage does not fall
within the range of 11 to 15V, check that
power cable connection is correct.
(6) Illumination
When the headlights or small lamps of a vehi-
cle are on, "On" is displayed. (If the orange/
white lead is not connected, "Off" appears.)
(7) Back Signal
When the gearstick is shifted to "R", the signal
switches to "High" or "Low". (Which of these
is displayed depends on the vehicle.)
60