External Unit; Operating The External Unit; Operate The External Unit By Using 1 Key; Operate The External Unit By Using F1 - F4 - Pioneer AVIC-D3 Operation Manual

MAN-AVIC-D3-EN.book Page 100 Monday, January 15, 2007 8:51 AM

External Unit

Operating the external unit

(1) (2)
The term "external unit" refers to a Pioneer prod-
uct (such as one available in the future) that,
although incompatible as a source, enables con-
trol of basic functions by the navigation system.
Two external units can be controlled by the navi-
gation system. When two external units are con-
nected, the navigation system allocates them to
external unit 1 or external unit 2.
For details concerning operation, refer to the
external unit's operation manual. This section
provides information on external unit operations
with the navigation system that differ from those
described in the external unit's operation man-
ual.
Operation varies depending on the external
unit connected. (In some cases, the external
unit may not respond.)
(1) Source icon
(2) External unit indicator
1
Touch "EXT-1" or "EXT-2" in the AV
Source screen to select the external unit.
"Selecting an AV source"
2
Touch any touch panel key to operate the
external unit.
100
Operate the external unit by
using 1 KEY – 6 KEY
The external unit can be operated by transmitting
the operating commands set to 1 KEY – 6 KEY.
Operation varies depending on the external
unit connected. (In some cases, the external
unit may not respond.)
1
Touch desired key ("1 KEY" – "6 KEY") to
operate the external unit.
Operate the external unit by
using F1 – F4
The external unit can be operated by transmitting
the operating commands set to F1 – F4.
The operating commands set to F1 – F4 vary
depending on the external unit.
Some functions may not be used until you
touch and hold the key.
1
Touch "F1" – "F4".
The operation command is transmitted to the
external unit.
Switching the automatic and
manual function
You can turn automatic and manual function on
or off.
You can switch between Auto and Manual func-
tions of the external unit connected.
Initially, this function is set to Auto.
Operating commands set for Auto and
Page 25
Manual operations vary depending on the
external unit connected.
1
Touch "A / M".
Touching "A / M" switches between "Auto"
and "Manual".