Remove the two screws located on the back panel of the Cat5 Extender receiver
Slide the top cover onto the back of the Cat5 Extender.
Remove the transparent cover from the delay line.
Using the adjustment stylus, adjust the knobs on the green, red, and blue delay lines
by gently moving them to the left and right.
Do not exert excessive force when making adjustments using the adjustment stylus.
Doing so may damage the delay lines.
Execute steps (1) to (3) in reverse order to assemble the Cat5 Extender.
To adjust color, remove the upper cover on the receiver of the Cat5
Extender. Be careful that no debris or foreign objects enter the Cat5
Extender while the cover is removed. Foreign objects within the Cat5
Extender may cause malfunctions.