Receiver Unit (Receiver) • AC Adapter • User’s Manual (this manual) • Masking Sticker • Rubber Feet • Cable Clamps • Adjustment Stylus • Ferrite Core If something is missing from the package, contact your supplier or local Fujitsu representative.
Please note the safety information in [Important Notices]. CAUTION 1. Check the package delivered and whether Cat5 Extender has been damaged when unpacking.
If you have any questions please contact your place of purchase or a Fujitsu maintenance person. To prevent extreme bumping or shaking when moving the Cat5 Extender use the original shipping container or a box similar to it.
CAUTION Observe the following when using the Cat5 Extender: Familiarize yourself with the relevant safety precautions before using the Cat5 Extender. Observe the safety precautions provided herein. They contain important information intended to prevent accidents that could damage your property or cause you bodily harm. Make sure that the Cat5 Extender is turned OFF when plugging or unplugging connectors.
To correct such problems, check the length of the Cat5 cable or change the video card preferences. Use only Fujitsu Cat5 Extenders when connecting transmitters and/or receivers. The Cat5 Extender cannot be connected to extenders made by other manufacturers.
Names and functions of each part Transmitter Unit (Transmitter) 1) Front panel POWER LED (green) This LED lights up while the machine is on. The POWER LED blinks when the keyboard or mouse is used. 2) Rear panel (3) (4) (5) (6) (7) (9) (10) (11) SERVER connector (black) Use the dedicated composite cable to connect the server to the Cat5 Extender.
CONSOLE SUN connector (black) Used to connect the SUN keyboard. If another keyboard or mouse is connected to the receiver, both peripherals cannot be operated simultaneously. PS/2 keyboards cannot be used in conjunction with SUN keyboards. AUDIO In connector φ Used to connect the stereo mini jack ( 3.5) to the server lineout.
Used to connect the PS/2 mouse. If another mouse is connected to the transmitter, both peripherals cannot be operated simultaneously. Keyboard connector (purple) Used to connect the PS/2 keyboard. If there is another keyboard connected to the transmitter, both keyboards cannot be operated simultaneously. PS/2 keyboards cannot be used in conjunction with SUN keyboards.
Attaching the Ferrite Cores Attach a ferrite core to the Transmitter side of the Cat5 cables. (To CAUTION decrease extraneous radiation.) Be careful not to pinch the cable or your fingers when closing and locking the ferrite core. Attach a ferrite core to each Video and Audio cable. If Audio is not used, a ferrite core will not need to be attached.
Connecting the Cables Read the Cat5 Extender manual before connecting the cables. CAUTION Do not connect or remove the cables during a thunderstorm. When unplugging cables hold them by the plug, not the cable. Connect and remove cables in the following order. Connecting cables 1.
4. Connecting the AC adapter to the transmitter 4.1 Connect the DC5V connector of the transmitter to the dedicated AC adapter and plug the AC adapter into an outlet. (Connect (10).) Using the fastening screws, securely connect the monitor connector (Mini D-SUB 15Pin) to the server.
Connection example 2. When using a SUN keyboard Cat5 Extenders power up in the following order: receiver, transmitter, server. The power down order is as follows: server, transmitter, receiver.
Setting up the Cat5 Extender Read the instruction manual before making any settings on the Cat5 Extender. CAUTION Incorrect settings may cause a severe drop in image quality. Setting the Cat5 cable length, method 1 1. Set the dip switches in accordance with the length of the Cat5 cable. 2.
Setting the Cat5 cable length, method 2 1. Set the dip switches on the receiver in accordance with the length of the Cat5 cable. 2. The dip switches are located on the bottom of the Cat5 Extender receiver. Cable length (m) SW10 30 to 100 ALL OFF...
Adjusting color To adjust color, remove the upper cover on the receiver of the Cat5 Extender. Be careful that no debris or foreign objects enter the Cat5 CAUTION Extender while the cover is removed. Foreign objects within the Cat5 Extender may cause malfunctions. Remove the two screws located on the back panel of the Cat5 Extender receiver case.
Delay line adjustment example During adjustment of the delay lines, the onscreen background will be black with white vertical lines on it. The use of paint or other similar application software is recommended. If the knob is moved in the "+" direction, green, red, or blue will move to the right.
1 2 3 More on dip switch settings CAUTION If the dip switches are not set properly for the keyboard you wish to use, you must reboot the server after correcting the dip switch settings.
Removing the Cables Unplug the power cords, from the power outlets, of all the equipment that are affected, then remove each cable. Cleaning the Cat5 Extender Turn off the power and unplug the power cable from the Cat5 CAUTION Extender connector. Do not use cleansers that contain abrasives, or such organic solvents as benzene or thinner, or disinfectant alcohol.
Application Example Connecting the Cat5 Extender to an 8 Port KVM Switch (FS-1008MT) Connecting the Cat5 Extender to a FUJITSU KVM Switch enhances expandability by making it possible to control multiple servers.
CAUTION Only connect the Cat5 Extender to KVM Switches manufactured by FUJITSU. It will not function properly if connected to KVM Switches made by a different manufacturer. The "KVM" in "KVM Switch" is an abbreviation for Keyboard, Video monitor, Mouse.
Composition Painted (Ivory) Metal case Size (W × D × H) 220 x 120 x 42 220 x 127 x 42 Unit: mm Mass 0.9kg (NC14004-B713) 0.9kg (NC14004-B713) 0.9kg (NC14004-B714) 1.0kg (NC14004-B714) Accessories AC Adapter User’s Manual (this manual) Masking Sticker...
Optional Accessories Item Product ID Remark CRT composite dedicated NC14000-B002 PS/2 cable cable (1.8m) CRT composite dedicated NC14000-B102 USB cable cable (1.8m) CRT composite dedicated NC14000-B202 SUN cable cable (1.8m) Item Product ID Remark Cat5E cable C5E-30 Sky blue 30m cable Cat5E cable C5E-50 Sky blue 50m cable...
Troubleshooting Symptom Cause Remedy No image The AC cord has come unplugged from Connect AC cord. displayed on either the outlet or the Cat5 Extender monitor Cat5 cable length setting is incorrect. Reset length, using the section on setting Cat5 cable length in this manual as a reference.
Printed in Japan ● The contents of this manual may be modified for improvements without prior notice. ● Fujitsu bears no responsibility for infringement of patent or other rights of third parties ascribable to the use of data in this manual.