Setting the Cat5 cable length, method 2
1. Set the dip switches on the receiver in accordance with the length of the Cat5 cable.
2. The dip switches are located on the bottom of the Cat5 Extender receiver.
Cable length (m)
30 to 100
150 to 200
After adjusting the length of the Cat5 cable, cover the dip switches with the
mask labels that are included with the server.
Certain combinations of video cards and monitors may cause a decline
in image quality or displacement of the display area even after settings
1 and 2 have been made. Should the image quality decline, adjust
resolution, etc. before using again.
shows switch position.