Source Audio SA170 User Manual page 9

AS – Auto-Scroll: This parameter enables/disables the auto-scroll func-
tion. When in auto-scroll mode, the footswitch preset scroll will continue
to scroll automatically even after the footswitch is released. This can be
a fun way to get unique tremolo or sequencer sounds as the unit steps
through the four equalizer presets at a given programmable rate. The
rate of the scrolling is controlled by the switching speed (SW) parameter.
Auto-scrolling will stop when the footswitch is pressed again. Like the
OE function, this parameter uses the two bottom LEDs on the display to
indicate ON or OFF.
MC – MiDi Channel: Use this parameter to edit the MIDI channel for the
Programmable EQ. The display will numerically indicate the currently
selected channel from 1 to 16.
Note: Backpage parameters can be reset to factory default values by
pressing both band select left and right buttons simultaneously.
PRESS
OE SW
+18
0
Off
-18
125 250 500 1K 2K 4K 8K
62 125 250
1 2 3 4
SAVE SELECT
OE SW AS
+18
PRESET SELECT
0
-18
125 250 500 1K 2K 4K 8K
62 125 250
BP
1 2 3 4
PROGRAMMABLE EQ
AS MC
+18
On
-18
500 1K 2K 4K
OUTPUT
ON/OFF
MC
+18
(HOLD)
0
-18
500 1K 2K 4K
OUTPUT
0
PRESS
Backpage Parameters | 9