Starting/Stopping The Engine - Renault velSatis Driver's Handbook Manual

STARTING AND STOPPING THE ENGINE USING THE REMOTE CONTROL CARD
Stopping the engine
When the vehicle is stationary,
briefly press button 1: the ignition is
switched off and "engine running"
indicator light A goes out.
For vehicles with
transmission, shift the lever to
parking position P.
Remove the card from card reader 2.
Removal of the card from the reader
causes the courtesy light to come on
(when in "automatic
position), the steering column to
lock and the accessories to cut out
(as a precaution, check that it is
properly locked).
Note: a beep will let you know if
you have left the card in the reader
when you open the driver's door,
and the card reader will also flash.
When you leave your
vehicle, especially if you
have your
Card with you, check
that the engine is completely
switched off.
2.04
automatic
lighting"
reader. Otherwise, the child could
start the
electrical equipment such as the
electric windows and there is a risk
that he or she may be injured (by
trapping his or her neck, arm,
hand, etc.). Risk of serious injury.
Never switch off the ignition before
the
completely. Once the engine has
stopped, the brake servo, power
assisted steering, etc. and the
passive safety devices such as
airbags and pretensioners will no
longer operate.
When the RENAULT Card is
RENAULT removed the steering will lock.
Never leave a child (or a
pet) in the vehicle by
himself/herself with the
RENAULT Card in the
engine or operate
vehicle has stopped
(continued)