Table of Contents
Advertisement
EXTERNAL LIGHTING AND SIGNALS
1
Main beam headlights
With
the
dipped
headlights lit, pull the stalk towards
you.
When the main beam headlights are
lit up, a warning light lights up on
the instrument panel.
To return to the dipped headlight
position, pull the stalk towards you.
Switching off the lights
Turn the end of stalk 1 back
to its original position.
See-me-home lighting function
This function (useful, for example,
for opening a gate, a garage, etc.),
enables you to momentarily turn on
dipped headlights.
With the ignition off and the
RENAULT Card removed from the
reader, pull stalk 1 towards you: the
dipped headlights light up for about
thirty seconds.
This action may be carried out no
more
maximum lighting period of two
minutes.
Lights on warning buzzer
beam
A warning buzzer will sound when
a front door is opened and the lights
are left on after the ignition has been
switched off (to prevent the battery
from going flat).
(continued)
than
four
times
for
a
Before setting off, check
that
the
equipment
correctly and adjust the
headlight beams (if your vehicle is
not carrying its normal load)
(depending on the vehicle).
Check that the lights are not
obscured (by dirt, mud, snow or
objects which could cover them).
electrical
is
operating
1.73
Advertisement
Chapters
Table of Contents
