Table of Contents
Advertisement
CRUISE CONTROL - SPEED LIMITER: limiter function
1
Switching on
Press
side of switch 1.
The warning light lights up on the
instrument
panel
information display switches to
speed limiter mode.
Limiting the speed
At a steady speed (above 18 mph
(30 km/h)) and in the correct gear
(for
vehicles
with
gearboxes), press switch 2: the
speed is stored.
2.30
Driving
When a limited speed has been
stored, the vehicle works in a
similar way to vehicles without the
speed limiter function, as long as
the limited speed is not reached.
From this point, no effort on the
accelerator pedal will allow you to
exceed the programmed speed
except
information on "exceeding the
limited speed").
and
the
manual
The system is designed in such a
way that it is possible to detect a
difference between the cruising
speed and the speed shown on
the instrument panel.
(continued)
in
an
emergency
(see
2
5
Varying the limit speed
The cruising speed may be changed
by pressing repeatedly or holding
down:
- key 2 to increase the speed,
- key 5 to decrease the speed.
Advertisement
Chapters
Table of Contents
