External Lighting And Signals - Renault velSatis Driver's Handbook Manual

EXTERNAL LIGHTING AND SIGNALS

1
2
Side lights
Turn the end of switch 1
until the symbol is opposite mark 3.
The instrument panel lights up, the
brightness can be adjusted by using
control knob 2.
1.72
3
1
Dipped beam headlights
Automatic operation
With the engine running, the
dipped beam headlights
switched on or off automatically
depending on the level of ambient
light, without the need to operate
the stalk 1 (position 0).
This function can be deactivated or
reactivated.
- To deactivate it, with the ignition
switched on and engine stopped,
turn stalk 1 twice consecutively
from position 0 to side lights. A
bleep confirms this action and the
message "Headlight
operation" deactivated
displayed.
Automatic operation (continued)
- To activate it, with the ignition
switched on and the engine
stopped or running, turn stalk 1
twice consecutively from position
0 to side lights. The message
"Headlight automatic operation"
active is displayed.
- To go to the main beam headlight
position, pull stalk 1 towards you.
To return to the dipped beam
headlight position, pull the stalk
towards you again.
- The lights go out when the engine
is stopped, when the driver's door
is opened or when the vehicle is
locked with the RENAULT card.
Manual operation
Turn the end of stalk 1 until the
are symbol faces mark 3.
In all cases, a warning light on the
instrument panel comes on.
automatic
is