Table of Contents
Advertisement
PARKING PROXIMITY SENSOR
Operating principle
Ultrasonic detectors, installed in
the front or rear bumper depending
on the vehicle, measure the distance
between the vehicle and an obstacle
whilst reversing.
When reverse gear is selected a beep
sounds.
This measurement is indicated by
beeps which become more frequent
the closer you are to the obstacle,
until they become one continuous
beep
when
the
approximately 25 centimetres from
the vehicle.
The sound of the beeps from the rear
system differs to that of the front
system.
Note: make sure that the ultrasonic
sensors are not blocked (dirt, mud,
snow, etc.).
2.36
obstacle
is
Operating faults
When
operation fault there will be a
5-second continuous beep as a
warning when reverse gear is
selected. This beep is accompanied
by the Check Parking Proximity
Sensor
RENAULT Dealer.
the
system
detects
message.
Contact
your
This
function
additional
indicates
between the vehicle and an
obstacle, using sound signals.
It cannot, therefore, under any
circumstances
vigilance or the responsibility of
an
the driver.
The driver should always pay
attention to sudden incidents
during driving: always ensure that
there are no moving obstacles
(such as a child, animal, pram or
bicycle, etc.) or small, narrow
objects such as stones or posts in
your path when manoeuvring or
nearing an obstacle.
is
an
aid
that
the
distance
replace
the
Advertisement
Chapters
Table of Contents
