Table of Contents
Advertisement
CRUISE CONTROL - SPEED LIMITER: cruising function
1
Putting the function on stand-by
The function is interrupted when
you:
- depress the brake pedal,
- depress the clutch pedal or shift
into neutral if the vehicle has an
automatic gearbox,
- press switch 4.
In all three cases, the cruising speed
is stored.
2
5
Recalling the cruising speed
If a speed has been stored, it is
possible to retrieve it by pressing on
button 3, on condition that you are
driving
faster
than
(30 km/h) and that you are sure that
the driving conditions are suitable
(traffic, road surface condition,
weather conditions, etc.).
Pressing button 2 or 5 reactivates
the
cruise
control
without taking into account the
stored speed: this is the speed at
which the vehicle was being
driven.
(continued)
Stopping the function
Press button 1. In this case, the
speed will not be not stored.
The instrument panel warning light
goes out to confirm that the function
is no longer operating.
3
4
18
mph
function
switched off or to standby: you
must depress the brake pedal to
brake.
There
is
no
rapid
reduction in the vehicle's
speed when the cruise
control
function
is
2.35
Advertisement
Chapters
Table of Contents
