Channel Master CM-7000 User Manual page 2

CM-7000 D2A DIGITAL TO ANALOG CONVERTER
P L E A S E R E A D T H I S O W N E R ' S G U I D E
Please take the time to follow this owner's guide carefully. It will help you set up and operate
your system properly, and enjoy all of its advanced features. Save your owner's guide for future
reference.
WARNING: To reduce the risk of fire or electric shock, do not expose the system to rain or
moisture.
WARNING: This apparatus shall not be exposed to dripping or splashing, and objects filled with
liquids, such as vases, shall not be placed on the apparatus. As with any electronic products, use care
not to spill liquids in any part of the system. Liquids can cause a failure and/or a fire hazard.
The CAUTION marks shown here are located on the back of your CM-7000 D2A Digital to Analog
Converter.
The lightning flash with arrowhead symbol, within an equilateral triangle, alerts the user to the
presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle alerts the user to the presence of important
operating and maintenance instructions in this owner's guide.
CAUTION
CAUTION
B A T T E R I E S
Please dispose of used batteries properly, following any local regulations. Do not incinerate.
© 2010 Channel Master. Channel Master is a registered trademark. All rights reserved. No part of this document may be
reproduced, modified, distributed or otherwise used without written permission. The distinctive design of the D2A Digital
Converter is a trademark of Channel Master.
The Channel Master logo is used under licensed agreement.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. © 1992-1997 Dolby Laboratories. All rights reserved.
To prevent electric shock, match wide blade of plug to wide slot, insert
fully.
No open flame sources, such as lighted candles, should be placed on the
apparatus.