Static Route; Chapter 11 Static Route; Overview; What You Can Do In The Static Route Screens - ZyXEL Communications P-660H-T1 v3s User Manual

C
H A P T E R

11.1 Overview

The P-660H-T1v3s usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the P-660H-T1v3s send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the P-660H-
T1v3s's LAN interface. The P-660H-T1v3s routes most traffic from A to the
Internet through the P-660H-T1v3s's default gateway (R1). You create one static
route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 50 Example of Static Routing Topology
A
R3

11.1.1 What You Can Do in the Static Route Screens

Use the Static Route screens
IP static routes on the P-660H-T1v3s.
P-660H-T1v3s User's Guide
LAN
WAN
(Section 11.2 on page
11

Static Route

R1
R2
132) to view and configure
131