The Remote Mgmt Screen - ZyXEL Communications P-2612HNU-F1 User Manual

Chapter 20 Remote MGMT

20.2 The Remote MGMT Screen

Use this screen to decide what services you may use to access which ZyXEL
Device interface. Click Maintenance > Remote MGMT to open the following
screen.
Figure 116 Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 75 Maintenance > Remote MGMT
LABEL
Services
LAN/WLAN
WAN
Port
Apply
Cancel
270
DESCRIPTION
This is the service you may use to access the ZyXEL Device.
Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the LAN and WLAN.
Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the WAN.
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
P-2612HNU(L)-FxF User's Guide