Try to connect to a website, such as "www. zyxel.com" to see if you have correctly
set up your Internet connection. Be sure to contact your service provider for any
information you need to configure the WAN screens.
3.3 How to Set up a Wireless Network
This section gives you examples of how to set up an access point and wireless
client for wireless communication using the following parameters. The wireless
clients can access the Internet through the ZyXEL Device wirelessly.
3.3.1 Example Parameters
SSID
802.11 mode
Channel
Security
An access point (AP) or wireless router is referred to as the "AP" and a computer
with a wireless network card or USB adapter is referred to as the "wireless client"
here.
We use the P-2612HNU-Fx web screens and M-302 utility screens as an example.
The screens may vary slightly for different models.
3.3.2 Configuring the AP
Follow the steps below to configure the wireless settings on your AP.
P-2612HNU-Fx User's Guide
SSID_Example3
802.11b/g
auto
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
Chapter 3 Tutorials
41