Placing Calls When You Don't Have Any Active Calls - Polycom SoundStation IP 7000 User Manual

Placing Calls When Your Phone is Connected to a Polycom HDX System
Note
You can place a call when your phone is idle, when you have an active call, or
when you have a call on hold.

Placing Calls When You Don't Have Any Active Calls

When you place a call, you must specify if the call will be an audio-only call or
a video call.
To place a call when you don't have any active calls:
1. Do one of the following:
— Press .
The message "Video or Phone Call?" displays. To place a video call,
press the Video soft key. To place an audio-only call, press the Phone
soft key.
or
— To place a video call, press the Video soft key. To place an audio-only
call, press the Phone soft key.
2. Do one of the following:
— To enter a phone number, enter the number of the person you want to
call.
or
— To enter an IP address or URL:
Placing a call using an IP address or URL may not be enabled for your phone. For
more information, see your system administrator.
If you are making an audio-only call, press the URL soft key. Then,
toggle the ABC and 123 soft keys to enter the URL or IP address of the
person you want to call.
If you are making a video call, toggle the ABC and 123 soft keys to
enter the URL or IP address of the person you want to call.
You can switch between entering a number or IP address, or a URL,
by pressing the 123 and ABC soft keys.
Using the Advanced Features of Your Phone
4 - 9