Connecting External Devices; Hdmi Port - Fujitsu STYLISTIC M532 Operating Manual

Connecting external devices

Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 11
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Adhere to the order described below when you connect external devices
to the Tablet PC or separate them from it:
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Please note that the connector of the cradle is only designed for this Tablet PC. To avoid
any damage to the device or the cradle, do not connect any other devices to the cradle.
Please note that the audio, USB and HDMI ports can only be used by the
Tablet PC and mains adapter connected to the cradle.

HDMI port

HDMIport
You can use the optionally available cradle or the optionally available USB/HDMI adapter to
connect HDMI capable end devices such as an LCD, plasma TV or video projector.
Fujitsu
chapter before connecting or disconnecting
► Place the Tablet PC in the cradle or connect
the USB/HDMI adapter with the docking port.
► Connect the data cable to the HDMI port of
the cradle or the USB/HDMI adapter.
Connecting external devices
61